Fluoropolymer and plasma coaters to the world
Coating Properties

Coatings - from the leading applicator

Regardless of whether you are looking for outstanding non-stick properties, good sliding properties, traction, resistance to abrasion, corrosion resistance, electrical insulation, sound deadening or impact resistance, Impreglon coating systems are the ideal solution.

After determining the best coating for your application and requirements, Impreglon UK will apply long lasting coating solutions that will may be a fluoropolymer (Teflon®, Xylan® or Greblon®) only or have metal or ceramic plasma reinforcement bases beneath the fluoropolymer. In addition we can apply the metal or ceramic plasma coatings in their own right.                                                                                                                                                        

Our coating product range also includes Zinc thermal diffusion (ZTD Coat®), the latest generation Sherardising process which has superior benefits to the older Sherardising technologies.                                                                                                                                                                          

Where necessary, Impreglon UK will develop a coating solution for a specific application. Impreglon UK coatings retain their ideal properties even under extreme conditions - and our manufacturing quality is to the highest standard.

Please note that some of the processes listed to the left may be restricted to certain Impreglon facilities. When you contact Impreglon UK we will advise you as to the most appropriate coating choice and, for those few specialised coating systems not applied in the UK, which of our coating facilities can apply the chosen coating system.

For similar reasons this website does not include datasheets. Impreglon UK is a coating specialist and with our extensive knowledge and experience, we believe we are best able to choose the best coating for your application based upon the information you give us. Please note that by best we mean the coating which will solve your problem and give you the longest lifespan rather than the cheapest available.

Abrasion resistant coatings

Plasma coating.
Corrosion Resistant Coatings

Polymer coating.
fluoropolymer coatings

Plasma / polymer combination coating.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Logon

Fluoropolymer Coatings

Fluoropolymer coatings are used in a number of key applications.
For example, where low friction or
non-stick is required.
If corrosion resistance is the objective, then Halar (ECTFE) or PFA are often used. Conductive coating versions are also available.
Fluoropolymer Coatings >>

 

TempCoat ®

The TempCoat® range is the family name given to the fluoropolymer coatings applied by Impreglon. The TempCoat® method creates a high quality polymer surface. These coatings have excellent sliding, non-stick, release and dry lubrication properties and the TempCoat® process ensures that the coating is securely anchored to the base material (substrate).
TempCoat >>

 

MagnaCoat ®

MagnaCoat® surfaces are heavy-duty fluoropolymer coatings which are pinhole free. They can also offer good non-stick properties and some have high electrical and impact resistance, even at elevated temperatures. The coatings provide excellent barrier protection to resist aggressive chemicals and other sources of corrosion. The MagnaCoat® range
of coatings are probably the best corrosion resistant coatings available.
MagnaCoat >>

Low Friction Coatings

Where low friction coatings are needed, PTFE coatings are usually used. Hard wearing low friction coatings can be achieved when combining fluoropolymer coatings with plasma reinforcement (such as stainless steel, Tungsten Carbide or ceramics).
Low Friction Coatings >>

 

Anti Corrosion Coatings

Special coatings that offer galvanic protection can be used to create a barrier layer. These coatings corrode in preference to the substrate when the coating is damaged. In addition we have corrosion resistant coatings where corrosion is prevented from happening due to the non-porous nature of the protective coating. Impreglon has a wide range of anti corrosion coatings with varying film thicknesses.
Anti Corrosion Coatings >>

 

Chemical Resistant Coatings

These coatings have thicknesses that range from around 200 microns to over 800 microns. Some of these coatings will withstand very aggressive and abrasive environments.
Impreglon chemical resistant coatings can be found throughout the chemicals and petrochemicals industries and applied to parts ranging from valves
to vessels.
Chemical Resistant Coatings >>

Non Stick Coatings

Special polymers (fluoropolymers, such as PTFE) are used to reduce the surface energy of the substrate surface and that effectively prevents many different substances from sticking. The choice of non-stick coating from the hundreds available to Impreglon UK is made based on experience and knowledge on how different fluoropolymers behave in different applications.
Non Stick Coatings >>

 

Plasma Coatings

The PlasmaCoat® method combines the outstanding hardness and wear resistance of thermally sprayed metal and ceramic coatings with the non-stick and sliding properties of polymers (both fluoropolymers and other polymers).
Plasma coatings can be used in their own right to give hard wearing surfaces.
Plasma Coating >>

 

Polyurethane Coatings

Polyurethane coatings come under the TempCoat® umbrella and are used to give impact resistance and sound deadening. Usually applied at thicknesses from 1mm upwards, the Impreglon polyurethane coating system is available in a range of colours.
Polyurethane Coatings >>

 

Complimentary Services

Click the link below for more information
complimentary services>

Powder Coatings

Electrostatic powder coatings are steadily gaining in significance. Impreglon has developed the FlexiColor® method to meet the increasing demand. The essential advantages of this product over conventional surface treatments
are high quality, economy and environmental safety.
Powder Coatings >>

 

Dry Lubrication

These coatings are used where moving parts need lubrication but, as the name suggests, the lubricity needs to be dry. An example would be a valve in an inaccessible location.
The Impreglon range of dry lubrication coatings includes PTFE, PTFE/graphite, PTFE/Molybdenum Disulphide and Molybdenum Disulphide on its own.
Dry Lubrication >>

 

Xylan® Coatings

Click the link below for more information on xylan coatings.
xylan® coatings>>

 

Teflon® Coatings

Click the link below for more information on teflon coatings.
teflon® coatings>

ZTD Coat® (Sherardising)

Click the link below for more information
sherardising>