Fluoropolymer and plasma coaters to the world
Coating Properties

Welcome to Impreglon UK - Innovative Coating Solutions

As the UK facility of a world renowned applicator of fluoropolymer, polyurethane, plasma coatings and Zinc thermal diffusion, Impreglon UK's systems, experience and high level of service can be relied upon to help you solve your surface technology requirements.

With 25 years experience, Impreglon UK is the fluoropolymer and plasma coating applicator for the UK and Ireland. For details on our Irish and Scottish agents please go to http://www.impreglon.co.uk/worldwide-locations.php
 
Part of the world renowned Impreglon Group, with 22 locations across 11 countries, our range includes, amongst others, the full Teflon®, Xylan® and Greblon® ranges, PTFE, PFA, FEP, ETFE, ECTFE (Halar), Polyurethane, ceramic spray (chrome oxide and alumina oxide) and metal spray (zinc, aluminium [TSA], stainless steel, nickel alloy and tungsten carbide).       

 

The introduction of a Zinc thermal diffusion process (ZTD Coat®), a superior technology to Sherardising, allows Impreglon UK to offer an even greater service to our clients.  ZTD Coat® has superior benefits over the old fashioned Sherardising process. For example the coating thickness is more consistent and uniform and there are no size limits as the process does not reply on tumbling.        

                                                                                                                                                                                                            
Our products are used wherever there is a need for low friction, non-stick, traction, high friction, easy clean, chemical resistance, corrosion resistance, solvent resistance, impact resistance, sound deadening or insulation. Food and medically safe coatings are available for all of these applications.

Serving the UK and Ireland, our client base includes
many blue chip companies from the following industries:

Aerospace, Chemical, Converting, Engineering, Film,
Food, Medical, Military, Non-woven, Oil & Gas, Packaging,
Petrochemical, Plastics, Printing, Rubber and Textile.

Group 2012 Q1 Results Announced

2012 Q1 sales are up by 13.9% compared with 2011 Q1.

Read more

 

 Impreglon Makes the Leap to China

On April 20, 2012 - effective retroactively as of January 1, 2012 - Impreglon acquired a majority stake of 51 % in a Chinese surface engineering company. 

Read more 

 Impreglon launches its own BioTech Division

New biological waste air purification process proves its merit at Impreglon.

Read more

 

 Impreglon Group acquires 25.1% of Ropal Europe AG.

Agreement on close cooperation for sustainable coatings.

Read more

Creative Agency by Nutcracker Logon Website Design in Birmingham by Nutcracker

Fluoropolymer Coatings

Fluoropolymer coatings are used in a number of key applications.
For example, where low friction or
non-stick is required.
If corrosion resistance is the objective, then Halar (ECTFE) or PFA are often used. Conductive coating versions are also available.
Fluoropolymer Coatings >>

 

TempCoat ®

The TempCoat® range is the family name given to the fluoropolymer coatings applied by Impreglon. The TempCoat® method creates a high quality polymer surface. These coatings have excellent sliding, non-stick, release and dry lubrication properties and the TempCoat® process ensures that the coating is securely anchored to the base material (substrate).
TempCoat >>

 

MagnaCoat ®

MagnaCoat® surfaces are heavy-duty fluoropolymer coatings which are pinhole free. They can also offer good non-stick properties and some have high electrical and impact resistance, even at elevated temperatures. The coatings provide excellent barrier protection to resist aggressive chemicals and other sources of corrosion. The MagnaCoat® range
of coatings are probably the best corrosion resistant coatings available.
MagnaCoat >>

Low Friction Coatings

Where low friction coatings are needed, PTFE coatings are usually used. Hard wearing low friction coatings can be achieved when combining fluoropolymer coatings with plasma reinforcement (such as stainless steel, Tungsten Carbide or ceramics).
Low Friction Coatings >>

 

Anti Corrosion Coatings

Special coatings that offer galvanic protection can be used to create a barrier layer. These coatings corrode in preference to the substrate when the coating is damaged. In addition we have corrosion resistant coatings where corrosion is prevented from happening due to the non-porous nature of the protective coating. Impreglon has a wide range of anti corrosion coatings with varying film thicknesses.
Anti Corrosion Coatings >>

 

Chemical Resistant Coatings

These coatings have thicknesses that range from around 200 microns to over 800 microns. Some of these coatings will withstand very aggressive and abrasive environments.
Impreglon chemical resistant coatings can be found throughout the chemicals and petrochemicals industries and applied to parts ranging from valves
to vessels.
Chemical Resistant Coatings >>

Non Stick Coatings

Special polymers (fluoropolymers, such as PTFE) are used to reduce the surface energy of the substrate surface and that effectively prevents many different substances from sticking. The choice of non-stick coating from the hundreds available to Impreglon UK is made based on experience and knowledge on how different fluoropolymers behave in different applications.
Non Stick Coatings >>

 

Plasma Coatings

The PlasmaCoat® method combines the outstanding hardness and wear resistance of thermally sprayed metal and ceramic coatings with the non-stick and sliding properties of polymers (both fluoropolymers and other polymers).
Plasma coatings can be used in their own right to give hard wearing surfaces.
Plasma Coating >>

 

Polyurethane Coatings

Polyurethane coatings come under the TempCoat® umbrella and are used to give impact resistance and sound deadening. Usually applied at thicknesses from 1mm upwards, the Impreglon polyurethane coating system is available in a range of colours.
Polyurethane Coatings >>

 

Complimentary Services

Click the link below for more information
complimentary services>

Powder Coatings

Electrostatic powder coatings are steadily gaining in significance. Impreglon has developed the FlexiColor® method to meet the increasing demand. The essential advantages of this product over conventional surface treatments
are high quality, economy and environmental safety.
Powder Coatings >>

 

Dry Lubrication

These coatings are used where moving parts need lubrication but, as the name suggests, the lubricity needs to be dry. An example would be a valve in an inaccessible location.
The Impreglon range of dry lubrication coatings includes PTFE, PTFE/graphite, PTFE/Molybdenum Disulphide and Molybdenum Disulphide on its own.
Dry Lubrication >>

 

Xylan® Coatings

Click the link below for more information on xylan coatings.
xylan® coatings>>

 

Teflon® Coatings

Click the link below for more information on teflon coatings.
teflon® coatings>

ZTD Coat® (Sherardising)

Click the link below for more information
sherardising>